Intermediate lightweight sheet piling includes SZ-10 SZ-11 SZ-12 etc. Assembly shall be in conformance with the manufacturer’s recommendations and the project plans and specifications.MSE walls in cut areas and side-hill fills with established ground water levels should be constructed with drainage blankets in back of and beneath the reinforced zone. Scaffolds supported by an outrigger boom, hoist, well pulley, or any other device or equipment used for hoisting material will be permitted, provided the platform of scaffold supports and the individual member to which each device is attached is reinforced and braced to withstand the additional loads imposed.For MSE walls utilizing metallic soil reinforcements supporting roadways which are chemically deiced in the winter, an impervious membrane should be placed below the pavement and just above the first level of soil reinforcement to intercept any flows containing deicing chemicals.
We supply SZ-14 and SZ-15 dimensions steel sheet pile. Bin Fill Bin fill material shall be well-graded, clean granular materials having a maximum particle size of 2 inches and having no more than 10% (by weight) passing the #100 sieve.Protection shall be provided for personnel on a scaffold exposed to overhead hazards.Internal drainage measures should be considered for all structures to prevent saturation of the reinforced backfill or to intercept any surface flows containing aggressive elements such as deicing chemicals. We offers these intermediate lightweight steel materials available in ASTM-A-572 / GR.50 / ASTM-A-328 / Bare or Galvanized finish.
of inertia
of section