Hot rolled Z type sheet pile Photos
Hot rolled Z type sheet pile
Z type sheet piles are made of building materials, and their locking openings are symmetrically distributed on both sides of the neutral axis. Coupled with the continuity of the web, the cross-sectional modulus of the steel sheet piles is greatly improved, ensuring that the mechanical properties of the cross-section are fully utilized. It is widely used in automobiles, railway vehicles, shelves, electrical cabinets, highway guardrails, building steel structures, containers, transmission towers, steel sheet piles, cable tray, agricultural machinery, furniture, vegetable greenhouses, pipe supports and other fields.Z type sheet piles are more widely used than U profile in port construction and deep foundation because Z profile can have a bigger modulus and can be used as intermediary piles for tubular and HZ combined walls.
Advantages of Z type sheet piles:
1. Flexible design with relatively high cross-sectional modulus and mass ratio;
2. A higher moment of inertia increases the stiffness of the sheet pile wall and reduces displacement deformation;
3. Large width, effectively saving time for lifting and piling;
4. The increase in section width reduces the number of shrinkage joints in the sheet pile wall, directly improving its water sealing performance;
5. Thickening treatment has been carried out on severely corroded areas, resulting in better corrosion resistance.
Section | Dimensions | Mass | Moment of inertia | Modulus of Section | ||||
Width | Height | Thickness | Per pile | Wall | ||||
w | h | t | s | |||||
mm | mm | mm | mm | kg/m | kg/m2 | cm4/m | cm3/m | |
CTZ 12-770 | 770 | 344 | 8.5 | 8.5 | 72.6 | 94.0 | 21 440 | 1 255 |
CTZ 13-770 | 770 | 344 | 9.0 | 9.0 | 76.1 | 99.0 | 22 370 | 1 310 |
CTZ 14-770 | 770 | 345 | 9.5 | 9.5 | 79.5 | 103.0 | 23 310 | 1 365 |
CTZ 14-770-10/10 | 770 | 345 | 10.0 | 10.0 | 82.9 | 108.0 | 24 250 | 1 415 |
CTZ 12-700 | 700 | 314 | 8.5 | 8.5 | 67.7 | 97.0 | 18 890 | 1 215 |
CTZ 13-700 | 700 | 315 | 9.5 | 9.5 | 74.0 | 106.0 | 20 550 | 1 315 |
CTZ 13-700-10/10 | 700 | 316 | 10.0 | 10.0 | 77.2 | 110.0 | 21 380 | 1 365 |
CTZ 14-700 | 700 | 316 | 10.5 | 10.5 | 80.3 | 115.0 | 22 200 | 1 415 |
CTZ 18 | 630 | 380 | 9.5 | 9.5 | 74.4 | 118.0 | 34 210 | 1 810 |
CTZ 18-10/10 | 630 | 381 | 10.0 | 10.0 | 77.8 | 123.0 | 35 530 | 1 880 |
CTZ 17-700 | 700 | 420 | 8.5 | 8.5 | 73.1 | 104.0 | 36 240 | 1 740 |
CTZ 18-80 | 700 | 420 | 9.0 | 9.0 | 76.5 | 109.0 | 37 810 | 1 810 |
CTZ 19-700 | 700 | 421 | 9.5 | 9.5 | 80.0 | 114.0 | 39 390 | 1 880 |
CTZ 20-700 | 700 | 421 | 10.0 | 10.0 | 83.5 | 119.0 | 40 970 | 1 955 |
CTZ 18-800 | 800 | 449 | 8.5 | 8.5 | 80.7 | 101.0 | 41 310 | 1 850 |
CTZ 20-800 | 800 | 450 | 9.5 | 9.5 | 88.6 | 111.0 | 45 060 | 2 010 |
CTZ 22-800 | 800 | 451 | 10.5 | 10.5 | 96.4 | 120.0 | 48 800 | 2 175 |
CTZ 23-800 | 800 | 474 | 11.5 | 9.0 | 94.6 | 118.0 | 55 270 | 2 340 |
CTZ 25-800 | 800 | 475 | 12.5 | 10.0 | 102.6 | 128.0 | 59 420 | 2 510 |
CTZ 27-800 | 800 | 476 | 13.5 | 11.0 | 110.5 | 138.0 | 63 580 | 2 680 |
CTZ 26 | 630 | 427 | 13.0 | 12.2 | 97.8 | 155.0 | 55 520 | 2 610 |
CTZ 24-700 | 700 | 459 | 11.2 | 11.2 | 95.7 | 137.0 | 55 830 | 2 440 |
CTZ 26-700 | 700 | 460 | 12.2 | 12.2 | 102.9 | 147.0 | 59 730 | 2 610 |
CTZ 28-700 | 700 | 461 | 13.2 | 13.2 | 110.0 | 157.0 | 63 630 | 2 770 |
CTZ 28-750 | 750 | 509 | 12.0 | 10.0 | 100.8 | 134.0 | 71 550 | 2 820 |
CTZ 30-750 | 750 | 510 | 13.0 | 11.0 | 108.8 | 145.0 | 76 680 | 3 015 |
CTZ 32-750 | 750 | 511 | 14.0 | 12.0 | 116.7 | 156.0 | 81 810 | 3 210 |
CTZ 36-700N | 700 | 499 | 15.0 | 11.2 | 118.6 | 169.0 | 89 620 | 3 600 |
CTZ 38-700N | 700 | 500 | 16.0 | 12.2 | 126.4 | 181.0 | 94 850 | 3 805 |
CTZ 40-700N | 700 | 501 | 17.0 | 13.2 | 134.2 | 192.0 | 100 090 | 4 005 |
CTZ 42-700N | 700 | 499 | 18.0 | 14.0 | 142.1 | 203.0 | 104 940 | 4 215 |
CTZ 44-700N | 700 | 500 | 19.0 | 15.0 | 149.9 | 214.0 | 110 160 | 4 415 |
CTZ 46-700N | 700 | 501 | 20.0 | 16.0 | 157.7 | 225.0 | 115 380 | 4 615 |
CTZ 46 | 580 | 481 | 18.0 | 14.0 | 132.6 | 229.0 | 110 460 | 4 605 |
CTZ 48 | 580 | 482 | 19.0 | 15.0 | 139.6 | 241.0 | 115 680 | 4 810 |
CTZ 50 | 580 | 483 | 20.0 | 16.0 | 146.7 | 253.0 | 121 070 | 5 025 |
CTZ 48-700 | 700 | 503 | 22.0 | 15.0 | 158.5 | 226.0 | 119 660 | 4 765 |
CTZ 50-700 | 700 | 504 | 23.0 | 16.0 | 166.3 | 238.0 | 124 900 | 4 965 |
CTZ 52-700 | 700 | 505 | 24.0 | 17.0 | 174.1 | 249.0 | 130 150 | 5 165 |
Z Type Hot Rolled Sheet Pile
Z Type sheet piles stands like the letter Z, and are long structural sections with vertical interlocking system which will forms a continuous sheet piling wall. The ability of a steel sheet piling profile depends on the modulus of section, steel grade and the soils and grounds it driven in. China sheet piling transfer pressure from one side of the wall to the soils in front of it. Hot rolling and cold rolling are the two primary production technology for China sheet piles, with the biggest difference is the interlock. Hot rolled Z sections are produced from steel at very high temperatures, so the interlocks would be more tight than cold formed interlocks. So in very hard grounds,sheet pile retaining walls,sheet pile cofferdams, Jetty construction, sheet pile quay walls, slope stabilization, wharf construction, China hot rolled sheet piles are preferred. Hot rolled sections are normally more watertight. Hot rolled steel sheet piles have almost 10% recycled content while cold formed steel sheet piling only have 70% recycled materials. Gradually cold rolled sheet piling and hot rolled sheet piling can replace each other in lots of projects.
Z type hot rolled steel sheet piles normally refer to AZ sheet pile, PZ sheet pile, PZC sheet pile OZ sheet pile etc. Because the competition of Z profiles are not so heavy as U profiles, Z profiles prices are normally higher than U profiles, although the rolling costs is roughly the same. Lots of sheet pile manufacturer and supplier don't know what is the difference between hot rolled sheet piles and Larssen sheet piles. Any sections with Larssen locks can be called Larssen steel sheet pile. Larrsen was the name of man who invented Larssen interlocks. So all sheet piling UK, Sheet pile Europe, steel sheet pile all can be called Larrsen sheet pile.
We keep a large stock of China hot rolled sheet piling with high quality, strictly as per Quality Assurance and Control Procedures. Most widely used standard is EN10248 Parts 1 & 2.
Hot rolled steel sheet piles have a ball or socket type interlock. Ball type interlocks are only compatible with ball type steel sheet pile. And socket type sheet piles are only compatible with socket interlocks. Ball clutches are normally used in USA, while in other parts, almost all socket interlocks