Grand Steel Piling

Interlocking cold formed sheet pile,MSZ15-312 ,MSZ15-340,MSZ15-350,MSZ15-375, MSZ15-406

Interlocking cold formed sheet pile MSZ15-312 or MSZ15-340 is not large enough to be marked MSZ15-350 watertight sealant with the word "hole" or "cover" to provide warning of the hazard it shall be marked with a high visibility paint to identify it.If MSZ15-406 becomes necessary to remove the cover, a monitor shall remain at the opening until the cover is replaced. The monitor shall advise persons entering the area of the hazard and prevent exposure to MSZ15-375 the hazard, but perform no other duties.

Intermediate Lightweight Sheeting Cross Section.Wire rope used for scaffold suspensions shall be capable of supporting six times the MSZ15-350 intended load. Shore or lean-to scaffolds are prohibited. All seams in the membrane shall be welded to prevent leakage. Bin fill shall be placed in 8-inch thick maximum loose lifts and shall be MSZ15-340 compacted to 95% standard Proctor density.Narrow gauge scaffolds (30 inches wide) shall not have working platform erected above 4 feet unless equipped with outriggers. Compaction by saturation is not permitted.

Mega Zee 15 steel sheet piling shall be placed MSZ15-375 and MSZ15-406 thick maximum loose lifts and shall be compacted to a minimum 90% standard Proctor density.Scaffolds shall be braced, and the braces shall be of the proper length so that the scaffold will remain plumb and rigid. All of the listed intermediate MSZ15-312 lightweight sheet pilings are fully manufactured in the USA. All the intermediate lightweight sheet piling can be cut to the length you need it.

 

Section Dimensions Mass Moment
of inertia Modulus
of section   Width Height Thickness Pile Wall       w h t/s           In In In Lbs/ft Lbs/ft2 In4/ft In3/ft MSZ10-312 38.82 2.19 0.312 49.72 15.37 1.3 0.67 MSZ10-340 38.82 2.19 0.340 54.10 16.72 1.41 0.72 MSZ10-350 38.82 2.19 0.350 55.69 17.22 1.45 0.74 MSZ10-375 38.82 2.19 0.373 59.67 18.45 1.56 0.79 MSZ10-406 38.82 2.19 0.406 64.60 19.97 1.73 0.86 MSZ11-312 38.55 3.53 0.312 49.72 15.48 6.83 3.76 MSZ11-340 38.55 3.53 0.340 54.1 16.84 7.43 4.06 MSZ11-350 38.55 3.53 0.350 55.69 17.34 7.65 4.17 MSZ11-375 38.55 3.53 0.375 59.67 18.58 8.21 4.44 MSZ11-406 38.55 3.53 0.406 64.6 20.11 8.92 4.79 MSZ12-312 37.72 6.64 0.312 49.72 8.76 29.29 8.76 MSZ12-340 37.72 6.64 0.340 54.1 9.50 31.87 9.50 MSZ12-350 37.72 6.64 0.350 55.69 9.77 32.84 9.77 MSZ12-375 37.72 6.64 0.375 59.67 10.43 35.17 10.43 MSZ12-406 37.72 6.64 0.406 64.6 11.27 38.16 11.27 MSZ13-312 36.38 9.58 0.312 49.72 14.13 67.86 14.13 MSZ13-340 36.38 9.58 0.340 54.10 15.32 73.79 15.32 MSZ13-350 36.38 9.58 0.350 55.69 15.74 75.93 15.74 MSZ13-375 36.38 9.58 0.375 50.67 16.81 81.34 16.81 MSZ13-406 36.38 9.58 0.406 64.6 18.18 88.27 18.18 MSZ14-312 34.56 12.24 0.312 12.27 19.62 120.97 19.62 MSZ14-340 34.56 12.24 0.340 18.89 21.29 131.28 21.29 MSZ14-350 34.56 12.24 0.350 19.34 21.91 135.50 21.91 MSZ14-375 34.56 12.24 0.375 20.72 23.38 144.93 23.38 MSZ14-406 34.56 12.24 0.406 22.43 25.29 157.25 25.29 MSZ15-312 32.79 14.11 0.312 49.72 18.20 172.66 24.24 MSZ15-340 32.79 14.11 0.340 54.10 19.80 187.52 26.27 MSZ15-350 32.79 14.11 0.350 55.69 20.38 193.26 27.06 MSZ15-375 32.79 14.11 0.375 59.67 21.84 207.03 28.91 MSZ15-406 32.79 14.11 0.406 64.60 23.64 224.46 31.27 MSZ16-312 31.05 15.54 0.312 49.72 19.22 223.36 28.45 MSZ16-340 31.05 15.54 0.340 54.10 20.91 242.98 30.88 MSZ16-350 31.05 15.54 0.350 55.69 21.53 249.85 31.74 MSZ16-375 31.05 15.54 0.375 59.67 23.06 267.87 33.95 MSZ16-406 31.05 15.54 0.406 64.60 24.97 290.74 36.75 MSZ17-312 29.71 16.43 0.312 49.72 20.09 262.34 31.60 MSZ17-340 29.71 16.43 0.340 54.1 21.86 285.10 34.27 MSZ17-350 29.71 16.43 0.350 55.69 22.50 293.36 35.25 MSZ17-575 29.71 16.43 0.375 59.67 24.11 314.57 37.71 MSZ17-406 29.71 16.43 0.406 64.60 26.10 241.03 40.80 MSZ18-312 28.38 17.2 0.312 49.73 20.58 296.05 34.49 MSZ18-340 28.38 17.2 0.24 54.1 22.39 322.09 37.45 MSZ18-350 28.38 17.2 0.350 55.69 23.04 330.95 38.46 MSZ18-375 28.38 17.2 0.375 59.67 24.69 354.49 41.12 MSZ18-406 28.38 17.2 0.406 64.6 26.74 384.83 44.53 MSZ19-340 26.88 17.9 0.340 54.1 23.61 368.18 41.17 MSZ19-350 26.88 17.9 0.350 55.69 24.30 867.04 42.24 MSZ19-375 26.88 17.9 0.375 59.67 26.04 929.74 45.25 MSZ19-406 26.88 17.9 0.406 64.60 28.19 1008.15 48.97

By Product

Contact Us

SHANDONG CT SHEET PILING CO.,LTD

Tel: 0086-635-8888 104

Fax: 0086-635-8888 204

Email:terry@cncdsteel.com

Email: max@cncdsteel.com

Head Office Address:Chuangye Building,TEAD,LiaoCheng,ShanDong,China

 Factory Address: High Tech Equipment Industrial Park, LiaoCheng , ShanDong,China

Website: http://www.sheetpile-china.com