Grand Steel Piling

MHZ38-1,MHZ40-1,MHZ42-1,MHZ44-1,Steel sheet pile

 

Section Width
w Height
h Thickness
t/s Section Area Weight Weight Modulus of section Moment of inertia   mm mm mm cm2 kg/m kg/2 cm3/m cm4/m MHZ12-1 770 343.5 8.6/8.5 120.8 72.8 94.5 21496 1252 MHZ12-2 700 314.2 8.6/8.5 123.5 67.9 97 18971 1208 MHZ13-1 770 344 9.1/9 126.5 76.2 99 22433 1304 MHZ13-2 700 315.2 9.6/9.5 135 74.2 105.9 20611 1308 MHZ14-1 770 344.5 9.6/9.5 132.2 79.6 103.4 23370 1357 MHZ14-2 700 316.2 10.6/10.5 146.4 80.5 114.9 22262 1408 MHZ17-1 700 420 8.5/8.4 132.8 73.3 104.7 36425 1735 MHZ17-2 630 374 8.5/8.5 141.2 69.8 110.8 31300 1675 MHZ18-1 700 420.5 9.1/9 139.1 76.7 109.6 38001 1807 MHZ18-2 630 375 9.5/9.5 153.7 76 120.7 33860 1805 MHZ19-1 700 421 9.6/9.5 145.4 80.2 114.6 39578 1880 MHZ19-2 630 376 10.5/10.5 172.7 82.2 130.5 36410 1935 MHZ20-1 700 421.5 10.1/10 151.7 83.7 119.5 41155 1953 MHZ20-2 630 377 11/11 172.7 85.4 135.6 377320 2005 MHZ24-1 700 459 12/9 162.9 89.5 127.9 55870 2435 MHZ24-2 700 459.2 11.3/11.2 174.4 95.8 136.9 55949 2437 MHZ26-1 700 460 13/10 176 96.7 138.1 59810 2600 MHZ26-2 700 460.2 12.3/12.2 187.4 103 147.1 59843 2601 MHZ27-1 700 460.7 12.8/12.7 193.6 106.4 152 61641 2676 MHZ28-1 700 461 14/11 189.1 103.9 148.4 63750 2765 MHZ28-2 700 461.2 13.3/13.2 200.4 110.1 157.3 63740 2764 MHZ36-1 700 499.2 15.1/11.2 216.1 118.7 169.6 89753 3596 MHZ38-1 700 500.2 16.1/12.2 230.2 126.5 180.7 94984 3798 MHZ40-1 700 501.2 17.1/13.2 244.4 134.3 191.8 100219 3999 MHZ42-1 700 499.2 18.1/14 260.2 143 204.2 105453 4228 MHZ44-1 700 500.2 19.1/15 274.3 150.7 215.3 110942 4436 MHZ46-1 700 501.2 20.1/16 288.5 158.5 226.5 116159 4635 MHZ48-1 700 503.2 22.1/15 290 159.3 227.6 120467 4788 MHZ48-2 580 482 19.2/15.1 307.2 139.9 241.1 115712 4801 MHZ50-1 700 504.2 23.1/16 303.4 166.7 238.2 125358 4973 MHZ52-1 700 505.2 24.1/17 317.2 174.3 249 130403 5162

 

The Steel sheet pile MHZ38-1 hulls started at the south MHZ40-1 end of the building and were built upside down. When the hulls were completed they were flipped over and the engines were installed, wiring put in, decks put on MHZ 38-1 and the pilot house and deck house installed.

Sheet piles MHZ42-1 natural movement of sand along the MHZ44-1 coast requires thorough study. These subjects have been discussed at this conference and will not receive further consideration MHZ 40-1 in this paper. Model studies of ocean entrances have not consistently given reliable results.

Selection of the exact site for the jetties is MHZ 42-1 a big problem, often not given sufficient study. The cost of construction should not be the sole criterion of jetty location. Local sources of materials is MHZ 44-1 a factor in design, often a controlling one. A fender is a rubber component that is attached to wharves, berthing dolphins, and other marine structures where vessels can make contact with the structure.

By Product

Contact Us

SHANDONG CT SHEET PILING CO.,LTD

Tel: 0086-635-8888 104

Fax: 0086-635-8888 204

Email:terry@cncdsteel.com

Email: max@cncdsteel.com

Head Office Address:Chuangye Building,TEAD,LiaoCheng,ShanDong,China

 Factory Address: High Tech Equipment Industrial Park, LiaoCheng , ShanDong,China

Website: http://www.sheetpile-china.com